Bullet design 36-170J

Approximate weight in clip-on wheel weight alloy: 170 grains


How to order:

To see a mold's price or add it to your cart, you'll need to configure it first. Begin this process below.

Note: If you want to cast multiple designs from one mold, please begin the order process here.


Filled view of bullet 36-170J Dimensioned view of bullet 36-170J

Bullet Notes:

The equal length driving bands here make a front band so long that it extends into the chamber mouth upon chambering. Sizing larger than .357"-.358" might create a cartridge that won't fully chamber. You can order an undersized front band if desired. Check your chamber first to see if you can extend .11" of full diameter outside of the case mouth.